Barco (Folsom) PS2001 PresentationPro Audio and Video Seamless Switcher - RENTAL ONLY
This unit combines an eight input universal video router, Barco’s high performance proprietary Athena scaler, and a full-featured control panel in a single integrated package. The eight universal analog inputs accept standard component and composite analog video formats (NTSC, PAL, SECAM), computer resolutions up to UXGA, and 480p and 720p analog HD formats.
The Barco Athena scaler features 1:1 pixel sampling, motion adaptive deinterlacing for both standard and high definition sources, 3:2 and 2:2 pull down detection, low video delay and aspect ratio correction. The operator can also capture and store three LOGO images for use as full-screen image or down stream key source.
Each unit incorporates one output that provides all output interface functions. Output resolutions supported include computer resolutions up to 1600x1200, analog HDTV resolutions up to 720p.
This PresentationPRO-II also features both SDI and DVI inputs. The DVI input provides a dedicated unscaled high-resolution background or downstream key source (DSK). A DVI output is also provided.
Product Weight: 9 lbs
Dimensions: 17"W x 11.25"D x 1.75"H (1RU)
User Guide: Operation Manual - PS2001
Input Channels: 8
Video Bandwidth: 350 MHz
Input Sync Signals: Sync-on-Video; Separate C or H, V
Supports conversion of RGB videos with horizontal scan rates up to 100 KHz and resolutions up to 1600x1200.
Videos with progressive 480p and 720p HDTV timing are supported. RGB input levels are independently programmable.
Accepts RGB, YUV, S-Video (Y/C), and Composite in both NTSC and PAL formats.
Input levels are independently programmable for RGB and YUV sources.
S-Video: Luminance and chrominance levels
NTSC/PAL Inputs: Hue and saturation controls
Synchronization: The unit automatically locks to the incoming video source.
Main Output Connectors: Two independently buffered RGBHV outputs with HD-15 connectors
Formats, User-selectable: VGA (640x480), SVGA (800x600), XGA (1024x768), SXGA(1280x1024)
Syncs: Separate C or H/V.
Frame Rate: User selectable 50Hz, 59.94Hz and 75Hz. (75Hz not available for SXGA)
Mixing and Transition Effects
Seamless switching between sources with cut, dissolve and wipe transitions
Ttransition time and wipe directions: fully programmable
Universal A/V Inputs: 7 stereo audio channels, 5-pin MCO Male connector
Microphone Jack: 1 non-switched MIC input, 3-pin MCO Male connector
Line Input: One non-switched LINE input, 5-pin MCO Male connector
Audio Levels: Consumer or Professional signal levels
Audio Mixing: MIC and LINE, mixed with audio from the selected A/V input
1 stereo audio channel, 5-pin MCO Male connectors
Levels: Outputs Consumer or Professional signal levels
A/V Source Selection: 8 illuminated keys support selection of A/V inputs or a stored logo image
Audio Volume/Muting Control: Independent control for Main Volume, LINE Volume, MIC volume and each of the seven A/V inputs
Video Transition Effects: Cut, dissolve, and wipe effects with programmable duration
Setup Controls: Vacuum fluorescent display, control knob, and 8 keys for menu-based front panel interface supporting all setup functions.
Reconfigurable RS-232 port for real-time control
Serial command format compatible with Folsom/Vista Control Systems' "SmartShow" format
Requirement: 115/130 VAC, 47-63 Hz
Consumption: 1.0 – 0.5 A.